1

1. Before Using the Printer

1.1. Product series introduction

Product series parameters			BP5100DN/BP5101DN/ BP5105DN series	BP5100DW series
Interface type	USB		●	●
	NET		●	●
	WiFi			●
Print Language
	PDL		●	●
Control Panel
	LCD		●	●
Print Speed	A4
		40ppm	●	●
	Letter	42ppm	●	●

Automatic Two-Sided Printing			●	●
NFC TAG				●
Mute printing			●	●

(●: Support; Blank: Unsupport)

This product series is subject to additions or changes without prior notice.

1.2. Supplied Accessories

Name	Parts
Toner cartridge
Drum component
USB Interface Cable
Power Cord
CD
Quick Setup Guide
Pantum Warranty

Note：

• The Pantum Warranty may not be attached in some regions.

1.3. Product View

Side view

1	Output Bin	For storing the printed paper.
2	Control Panel	Indicate printer status to conduct set operation.
3	Output Tray	To prevent the printed paper from falling.
4	Front Cover	To open the front cover to take out the laser toner cartridge.
5	Multipurpose feed tray	For placing media to be printed in multi-purpose tray.
6	Power switch	Turn the power on or off and press this button under Ready state to enter energy-saving mode. Press and hold this button for more than 2s to turn the printer power off.
7	Automatic Feeder Tray	For placing mediums that are printed in auto feed tray.
8	Paper width guide of multi-purpose tray	Slide paper deflector to adapt to paper width.
9	Paper length guide of multi-purpose tray	Adjust the paper length guide to match the paper length.
10	NFC (Near Field Communication) label	Touch this label on mobile device to download or start Pantum printer App and connect WiFi Directly.
11	Front cover button of printer	For opening and closing the front cover of the printer.
12	Paper width guide of tray	Slide paper width deflector to adapt to paper width.
13	Paper length guide of tray	Slide paper length deflector to adapt to paper length.
14	Clip of extended tray of the paper tray	For adjustment of length extension of the tray .

Rear View

1	USB Interface	For connecting product to computer with USB cable.
2	Network Interface	For connecting product to network with network cable.
3	Power Interface	For connecting product to power with power cord.
4	Rear Cover	For paper release when it gets jammed.
5	Duplex Printing Unit	For paper feed at duplex printing and paper release when paper gets jammed at duplex printing.

Note：

Printer appearance may differ because of various models and functions, so the schematic diagram is only for your reference.

Optional tray

1	Optional tray	For placing media to be printed in optional tray.
2	Paper width guide of tray	Slide paper width deflector to adapt to paper width.
3	Paper length guide of tray	Slide paper length deflector to adapt to paper length.
4	A5/A6 stopper	Install the stopper to match the A5 L/A6 paper size.

Note：

• The printer can support up to two optional trays.

• If you want to buy optional trays, please contact the local dealer who has purchased the printer.

• Printer appearance may differ because of various models and functions, so the schematic diagram is only for your reference.

• If you need to print A5 L, A6 size, please install A5/A6 stopper on the tray first. For installation, please refer to the Quick Installation Guide for optional accessories.

• A5/A6 stopper is not available separately, please keep it properly.

1.4. Laser Toner Cartridge

Laser toner cartridge is composed of drum component and toner cartridge.

Service life of drum component

Type	Average Print Volume
Standard drum component	About 30000 Pages(Based on ISO 19752 standard)

Service life of toner cartridge

Type	Average Print Volume
Standard-volume toner cartridge	About 3000 Pages(Based on ISO 19752 standard)
High-volume toner cartridge	About 6000 Pages(Based on ISO 19752 standard)
Super large volume catridge	About 15000 Pages(Based on ISO 19752 standard)

Note：

• The model is subject to increase without notice.

• Consumables capacity may vary with different using types.

• The Company does not recommend using consumables other than the original consumables provided, as any damages caused by non-original consumables are not covered by the scope of warranty.

• Toner cartridge appearance may differ because of multiple volume and models, so the schematic diagram is only for your reference.

• High volume drum component and super large volume catridge are only applicable to some models, please refer to the specifications of the model that you actually purchase.

1.5. Control Panel

1.5.1. Overview of control panel

The layout of the printer control panel is shown below:

LCD control panel

No.	Name	Functions
1	LCD Display	Display operation interface and product information.
2	WiFi indicator/save toner indicator	Indicate WiFi connection status (applicable to WiFi model only). Indicate the on/off of save toner function (applicable to non-WiFi model only). (Please refer to Chapter 1.5.2.1).
3	Toner cartridge/status indicator	Indicate the status of toner cartridge and printer (please refer to Chapter 1.5.2.1).
4	Menu	Open the main menu of control panel.
5	OK	Confirm the selection on screen.
6	UP	Scroll through the menus and options . For menu items need to input, change the numeric value by cycle accumulating.
7	Down	Scroll through the menus and options . For menu item needs to be input, shift the entry positions from left to right, for example, IP address entry.
8	Back	Return to the previous menu.
9	WiFi key/save toner key	Short press WiFi button to turn on direct WiFi connection of the printer and automatically print out "Mobile Device WiFi Connection Wizard" page (for models with WiFi function only). Long press WiFi button for over 2s to start WPS when WiFi is not connected or to disconnect WiFi when it has already been connected (for models with WiFi function only). Open save toner function(applicable to non-WiFi model only).
10	Cancel	Execute cancel operation.

No.	Display of WiFi/save toner indicator	Status	Status description (applicable to WiFi model only)	Status description (applicable to non-WiFi model only)
1		Die out	WiFi disconnected and sleep mode	Turn save toner state function and sleep mode
2		Blue indicator blinks	WiFi connecting	None
3		Blue indicator normally on	WiFi connected	Turn on save toner function

No.	Display of toner cartridge/status indicator	Status	Status description
1		Die out	Sleep mode
2		Green indicator blinks	Warming up, printing, print cancelling
3		Green indicator normally on	Printer is ready
4		Orange indicator blinks	Low toner warning
5		Orange indicator normally on	Toner cartridge error (uninstalled ink cartridge, unmatching ink cartridge, invalid toner cartridge)
6		Red indicator normally on	Printer errors such as paper error (paper out, paper jam, paper feed failure), opened front cover